Custom made adapter – female 1/2-20 UNF to 1/2-28 UNEF male thread, or Custom made adapter – female 1/2-28 UNF to 1/2-20 UNEF male thread, ​ Material is ​​​​ Hard aluminum alloy. Through bore is 8 mm (0.315″) wide. Inner threads depth is 1/2″, outer threads length is 1/2″. Body...

The post Barrel End Adapter Female 1/2-20 UNF To Male 1/2-28 UNEF or Female 1/2-28 UNF To Male 1/2-20 UNEF appeared first on PCP Mart.

                       Air Rifle PCP Filling Probe Adapters: Description: These filling probe adapters are compatible with the following: FX Hatsan, BSA, Webley, SMK Artemis, Cricket Ataman, WEIHRAUCH, Walther Rotex R8 and RM8 Replacement   The package contains 1x filling probe adapter...

The post PCP Filling Probe Adapters for Air Rifles appeared first on PCP Mart.

Custom made silencer adapter for Umarex Gauntlet air rifle with 1/2-20 tpi thread to attach your air gun silencer, and with M20x1 thread to fit the 22mm OD shroud. Material is steel, blued. With thread protector. Through bore is 8 mm (0.315″) wide. Suitable for .177, .22. and .25 cal. Knurling pattern may be different...

The post Silencer Adapter for Umarex Gauntlet 1/2-20 UNF appeared first on PCP Mart.

PCP air filling probe Adaptor for Airguns. These quick charge fill probes are available for the models below: FX Hatsan, BSA, Webley, SMK Artemis, Cricket, WEIHRAUCH, Walther, PR900, Rotex R8 RM8 Brocock Other models are also available. Please check the images for a specific model.   Please Note: item including one...

The post PCP Air Filling Probe Adaptor For FX Hatsan,BSA,Webley,SMK Artemis,Cricket,Weihrauch,Walther, PR900, Rotex R8 and RM8 Brocock appeared first on PCP Mart.

Product description:   Mede by Stainless steel, it is not Aluminum, never rust.  Low profile adapter work with any 1/8-27 NPT threaded hose. With gauge,allows the player to see co2 pressure. Knurled pattern handle with easy screw on/off. The highest pressure is 12000psi is OK!

The post PCP airgun Inner Thread 1/8″ NPT Male Quick Disconnect Adaptor appeared first on PCP Mart.

Product description:   Designed for use as a low profile alternative to the stock A-5 loader  Compatible with All Tippmann Cyclone Feed Systems – A-5, X7 and 98  The adapter is user sizeable, and can be easily cut down into three different  heights, which accommodate either 30, 40, or 50...

The post PCP Tac Cap Cyclone Feed Hopper for Tippmann A5/X7/98 paintball appeared first on PCP Mart.

Steel M14 x 1 Left AK/SKS for 7.62*39 Thread Adapter CKC Sat Like a Native Hole Widened Fits on Amoeba m4a1 Hunting A This adaptor attaches to AK or SKS by four set screws M14 x 1 LH AK/SKS Thread Adaptor Russian 14mm reverse threads All steel construction Fit Norinco...

The post Steel M14 x 1 Left AK/SKS for 7.62*39 Thread Adapter appeared first on PCP Mart.

Custom made polished brass silencer adapter for Crosman 2240/2250 air gun. 1/2 UNF standard thread for common air gun/rifle silencers or LDC (lead dust collector).   This will fit all 7/16″ Crosman barrels (11,11 mm), adapter has been precision reamed to that dimension. Securing is done with M4x0.75 mm or...

The post Silencer Adapter Brass 1/2 UNF for Crosman 2240 2250 With Thread Protector appeared first on PCP Mart.

Custom made silencer adapter for Marauder air rifle, or M-Rod with 1/2-20 tpi thread to attach your air gun silencer, and with 13/16-28 thread to fit the 7/8″ shroud. Material is steel, blued. With thread protector. Through bore is 8 mm (0.315″) wide. Suitable for .177, .22. and .25 cal. Knurling pattern may be...

The post Silencer Adapter for Benjamin Marauder (M-Rod)/Armada/Fortitude 1/2-20 UNF appeared first on PCP Mart.

This listing is for a replacement fill adaptor (or spare o rings) for Logun Rifles; —Webley (Raider, Raider,FX2000 10 etc); –Hatsan (All models); –RWS (All PCP’s except LR20 and LR25); –Ripley (Most models); –Prestige (All models); –Evanix (All models with quick fill probe); –FX Rifles; –RWS Rifles; –JKhan Rifles; –Kral...

The post PCP Air Rifle Quick Filling /Charging Probe Adaptor Adapter FX Hatsan,Evanix,Logun,Webley, W/9mm OD appeared first on PCP Mart.

8MM Quick Disconnect Male Female Adaptor Fill Nipple Blind Plug High quality stainless steel male and female quick-connect fittings. Quick Disconnect Adapter has Thread 1/8NPT , 1/8BSP(G1/8) , Male M10*1 can be choosed. Rated to 6000PSI.      

The post PCP High Pressure 8MM Foster Quick Disconnect Male Female Adaptor Fill Nipple Blind Plug appeared first on PCP Mart.

Product description:   Mede by Stainless steel never rust.  Rated to 6000PSI.  8MM Quick Disconnect Adaptor Double Male Fill Nipple replacement to your existing fill valve/regulator. 

The post Paintball AirGun PCP Both End Male Quick Disconnect Adaptor appeared first on PCP Mart.

Custom made silencer adapter for Marauder air rifle, or M-Rod with 1/2-20 tpi thread to attach your air gun silencer, and with 13/16-28 thread to fit the 7/8″ shroud. Material is steel, blued. With thread protector. Through bore is 8 mm (0.315″) wide. Suitable for .177, .22. and .25 cal. No knurling . Fits...

The post Silencer Adapter for Benjamin Marauder (M-Rod)/Armada/Fortitude 1/2-20 UNF appeared first on PCP Mart.

Custom made silencer adapter for Marauder air rifle, or M-Rod with 1/2-28 tpi thread to attach your air gun silencer, and with 13/16-28 thread to fit the 7/8″ shroud. Material is steel, blued. With thread protector. Through bore is 8 mm (0.315″) wide. Suitable for .177, .22. and .25 cal. Knurling pattern may be...

The post Silencer Adapter for Benjamin Marauder (M-Rod)/Armada/Fortitude 1/2-28 UNEF appeared first on PCP Mart.

Custom made adapter – female 1/2-28 UNEF to 1/2-20 UNF male thread. Material is steel, blued. Through bore is 8 mm (0.315″) wide. Inner threads depth is 1/2″, outer threads length is 1/2″. Body OD is 3/4″.                  

The post Adapter Female 1/2-28 UNEF To Male 1/2-20 UNF appeared first on PCP Mart.

Adapter for Marauder Rifle air gun, or M-Rod with 1/2-20 tpi or 1/2-28 tpi thread to attach your air gun silencer, and with 13/16-28 thread to fit the 7/8″ shroud. Material is aluminum alloy, Black. With thread protector. Through bore is 8 mm (0.315″) wide. Suitable for .177, .22. and .25 cal. For...

The post PCP Silencer Adapter for Benjamin Marauder (M-Rod) /Armada/Fortitude 1/2-28 UNEF and 1/2-20 UNEF appeared first on PCP Mart.

Custom made silencer adapter for Marauder Pistol air gun, or P-Rod with 1/2-28 tpi thread to attach your air gun silencer, and with 11/16-24 thread to fit the 3/4″ shroud. Material is steel, blued. With thread protector. Through bore is 8 mm (0.315″) wide. Suitable for .177, .22. and .25 cal. Knurling pattern may...

The post Silencer Adapter for Benjamin Marauder Pistol(P-Rod) 1/2-28 UNEF appeared first on PCP Mart.

Product description: 30+extra capacity, no tools needed for install, light weight and high density. Nowyou can install red dots, lasers, scopes, etc. Fits A5, 98, X7 with cycloneFeed, R5, and Allen hoppers. Greatly improved sightline.  

The post PCP Offset hopper adapter for Tippmann A5/X7/98 appeared first on PCP Mart.

 Airsoft HPA Foster Quick Disconnect Release, Male Plug 22-2,23-2, Female Plug 2202,2302 HPA magazine adapters setup for airsoft pistol, male foster quick disconnect coupler Here are 3 types for you to choose from: KJW/WE adapter. KSC/KWA adapter. Marui adapter. Material: Steel For KJW/WE: VFC , AAP-01,AW Hi-capa…magazine. For KSC KWA：Can...

The post HPA Magazine Adapters Setup for Airsoft appeared first on PCP Mart.

Custom made silencer adapter for Marauder Pistol air gun, or P-Rod with 1/2-20 tpi thread to attach your air gun silencer, and with 11/16-24 thread to fit the 3/4″ shroud. Material is steel, blued. With thread protector. Through bore is 8 mm (0.315″) wide. Suitable for .177, .22. and .25 cal. Knurling pattern may...

The post Silencer Adapter for Benjamin Marauder Pistol(P-Rod) 1/2-20 UNF appeared first on PCP Mart.